Dial Mode; Quiet Mode - VTech CS6648-2 User Manual

Telephone settings

Dial mode

The dial mode is preset to touch-tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse dialing
before using the telephone to make a call.
1. Press MENU when the handset/telephone base is not in use.
to scroll to Settings, then press SELECT.
2. Press or
to select Dial mode.
3. Press or
to select Touch-tone or Pulse.
4. Press or
5. Press SELECT to save your selection and return to the previous
menu. You hear a confirmation tone.

Quiet mode

You can turn on quiet mode for a period of time (1-12 hours). During this period,
all tones (except paging tone) and call screening are muted.
When you turn on the quiet mode, the answering system turns on automatically.
When the quiet mode duration expires, the answering system remains on.
To set and turn the quiet mode on:
Press and hold QUIET
1.
is not in use. The screen shows Quiet: _ _ hours (1-12).
2. Use the dialing keys to enter the desired duration (1-12),
then press SELECT. All screens display Quiet mode on
and . The /ANS ON/OFF
turns on.
To turn the quiet mode off:
• While the quiet mode is on, press and hold QUIET
screen displays Quiet mode off briefly and then returns to idle.
When you change the settings of the ringer tone or ringer volume,
you can still hear the samples even if the quiet mode is on.
#
when the handset/telephone base
light on the telephone base
18
#
. The
Dial mode
ECO
Touch-tone
ECO
Quiet: _ _ hours
[1-12]
ECO
11:59 2/17
AM