Network Deployment - Vivotek SD8111 User Manual

VIVOTEK
Shown on the right is the connection diagram for
Digital inputs and outputs.

Network Deployment

Setting up the Network Camera over the Internet
There are several ways to set up the Network Camera over the
up the Network Camera behind a
to use PPPoE.
Internet connection via a router
Before setting up the Network Camera over the Internet, make sure you have a router and follow
the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated below.
Regarding how to obtain your IP address, please refer to Software Installation on page 12 for
details.
10 - User's Manual
router. The second way is to utilize a static
WAN (Wide Area Network )
Router IP address : from ISP
Internet
LAN (Local Area Network)
Router IP address : 192.168.0.1
Cable or DSL Modem
12V
PIN 16
Digital output
+12V
PIN 12
Digital input
PIN 20
Ground
Internet. The first way is to set
IP. The third way is
IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
Power+12V