Network Deployment - Vivotek IP8371 User Manual

Network Deployment

Setting up the Network Camera over the Internet
This section explains how to configure the Network Camera to an Internet
1. If you have external devices such as sensors and alarms, connect them to the general I/O
terminal block.
2. Connect the camera to a switch via Ethernet cable.
3. Connect either the DC 12V or AC 24V power wires from the Network Camera to a power
outlet.
There are several ways to set up the Network Camera over the
up the Network Camera behind a
using PPPoE.
router. The second way is to utilize a static
connection.
3
2
Ethernet Switch
Internet. The first way is to set
IP. The third way is
User's Manual - 13
VIVOTEK