Camera Control - Vivotek SD8111 User Manual

Camera Control

This section explains how to control the Network Camera's Pan/Tilt/Zoom/Focus operation via
the control panel and how to preset locations.
Preset Locations
On this page, you can preset positions for the Network Camera to go to directly or patrol. A total of 128
preset positions can be configured.
Please follow the steps below to preset a position:
1. Adjust the shooting area to a desired position using the buttons on the right side of the window.
2. Click Set Current Position as home or Restore Home Position to Default to define your home
position.
3. Enter a name for the preset location, which allows for up to 40 characters. Click Add to enable the
settings. The preset locations will be displayed under the Preset Location list on the left-hand side.
4. To add additional preset positions, please repeat step 1~3.
5. To remove a preset position from the list, select it from the list and click
fold the list.
6. Click Save to enable the settings.
2
3
5
6
2010/05/06 13:44:17
VIVOTEK
. Click or to unfold or
1
Functions are the
same as the Control
Panel on the home
page.
User's Manual - 67