Vivotek SD8111 User Manual page 60

VIVOTEK
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open
the Sensor Settings Profile Settings page as shown below.
Please follow the steps beolw to setup a profile:
1. Check Enable this profile.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range
of time if you choose Schedule mode.
3. Configure Exposure settings in the second column. Please refer to the last page for detailed
information.
4. Click Save to enable the setting and click Close to exit the page.
60 - User's Manual