Vivotek SD8111 User Manual page 129

Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
di
mdwin
mdwin0
inter
VALUE SECURITY
(get/set)
string[40] 6/6
0, 1 6/6
0, 1, 2 6/6
1~999 6/6
boot, 6/6
di,
motion,
seq,
recnotify,
String[40] 6/6
<integer> 6/6
<integer> 6/6
<integer> 6/6
1~999 6/6
DESCRIPTION
Identification of this entry.
Enable or disable this event.
Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
Delay in seconds before detecting the next event.
Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"recnotify" = Recording notification.
The status for event trigger
Indicate which DI detects.
This field is required when trigger condition is "di".
One bit represents one digital input. The LSB
indicates DI 0.
Indicate which motion detection windows detect.
This field is required when trigger condition is "md".
One bit represents one window.
st
The LSB indicates the 1
For example, to detect the 1
mdwin as 5.
Similar to mdwin. The parameter takes effect when
profile 1 of motion detection is enabled.
Interval of snapshots in minutes.
This field is used when trigger condition is "seq".
VIVOTEK
window.
st rd
and 3 windows, set
User's Manual - 129