Table of Contents
Advertisement
7
Adjusting the Lens
Based on the live image retrieved from the camera, adjust the camera lens to the desired
view angle:
1. Turn the lens module left and right.
2. Loosen the tilt adjustment screws on both sides of the camera and then turn the lens
module up and down. Upon completion, tighten the screws.
3. Turn the lens to adjust the image orientation.
1
Pan 350°
The sophisticated 3-axis mechanism design offers very flexible, easy hardware installation
for either ceiling or wall mount.
To adjust the zoom factor and focus range
1. Loosen the zoom controller and then adjust zoom factor by moving the controller left and
right. Upon completion, tighten the zoom controller screw.
2. Loosen the focus controller and then adjust focus range by moving the controller left and
right. Upon completion, tighten the focus controller screw.
DO NOT over-tighten the controller
bars. Doing so will damage the
camera lens module.
3-axis Mechanism Design
EN - 10
2
Tilt 65°
Rotate 350°
3
W
T
N
Advertisement
Table of Contents
