Vivotek FD8156 Quick Installation Manual

Hide thumbs Also See for FD8156:

User manual (206 pages)

Specifications (2 pages)

page of 8

/ 8
Bookmarks

Quick Links

Download this manual See also: User Manual

Lens retention screw

Lens

NOTE:

1. The camera can only be powered by Power

over Ethernet (PoE).

2. The camera can only be installed in an

indoor environment.

Before you begin:

You can connect the

Ethernet cable to a PC or

laptop for a live view. (See

page 5). Raise the camera

to the estimated position,

and evaluate the field of

view by turning the mount

bracket and lens.

FD8156/8168

Reset button

Microphone

Loosen the retention screw

to change shooting angle.

Quick Installation Guide

MicroSD card

slot

Part no.: 625024500G

Status LED

Shooting

direction

Need help?

Do you have a question about the FD8156 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vivotek FD8156

Page 1: Quick Installation Guide
FD8156/8168 Quick Installation Guide Lens retention screw Part no.: 625024500G Lens Reset button Status LED Microphone MicroSD card slot NOTE: 1. The camera can only be powered by Power over Ethernet (PoE). 2. The camera can only be installed in an indoor environment.
Page 2 Ceiling Mount Procedure: 1. Attach the alignment sticker to 3. Install the mount bracket a preferred location, with the using the self-tapping Front mark facing the shooting screws. direction. Front mark 30mm 2. Drill a 30mm cabling hole if preferred. Mount bracket 4.
Page 3 Wall Mount Procedure: 1. Attach the mount bracket to the wall-mount bracket, with the Front mark facing the shooting direction. Note that you should turn the bracket to aim the Front mark at the shooting direction. 2. Attach the alignment sticker to a preferred location. 3.
Page 4 5. Hang the bracket onto the screws. You can then fasten the screws to wall. 6. Connect the Ethernet cable and pass cable through the hole. Join the camera with the bracket by sliding it along the grooves.
Page 5 Tune the focus: Connect the camera to a PC or laptop. Install and use the IW2 utility to discover your camera on LAN. Double-click on the camera entry to open a web session. If your image appears to be out of focus, use the included focus adjustment tool to tune the focus.
Page 6 Carefully place the tool onto the lens, and turn clockwise or counter-clockwise to adjust the focus. NOTE: Press the release button if you should need to re-install the camera. Release button...
Page 7 This page is intentionally left blank.

This manual is also suitable for:

Fd8168