ProForm 1050 Sts Elliptical User Manual page 11

11. While a second person tips the elliptical exercis-
er forward, attach the Rear Track Cover (17) to
the Track (2) with four #8 x 2" Screws (68).
12. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be
left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the
elliptical exerciser.
Plug the power supply into the socket at the front of the elliptical exerciser (see HOW TO PLUG IN THE
POWER SUPPLY on page 12). IMPORTANT: If the elliptical exerciser has been exposed to cold tem-
peratures, allow it to warm to room temperature before plugging in the power cord. If you do not do
this, the console displays or other electronic components may become damaged.
11
17
2
68
11
68