Healthrider H150t Treadmill User Manual page 15

16. Raise the Frame (57) to the position shown.
Have a second person hold the Frame until
step 17 is completed.
Orient the Storage Latch (54) so that the large
barrel and the latch knob are oriented as shown.
Remove any ties from the end of the Storage
Latch (54). Attach the lower end of the Storage
Latch to the Base (29) with a 3/8" x 2" Bolt (2)
and a 3/8" Nut (9).
17. Attach the upper end of the Storage Latch (54) to
the Frame (57) with a 3/8" x 2" Bolt (2) and a 3/8"
Nut (9).
Lower the Frame (57) (see HOW TO LOWER
THE TREADMILL FOR USE on page 25).
18. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex key in a secure place; the hex key is used to adjust
the walking belt (see pages 27 and 28).
16
57
29
Latch
Knob
Large
Barrel
17
57
9
15
9
2
54
2
54