Healthrider H150t Treadmill User Manual page 10

6. Identify the Left and Right Base Covers (88, 89).
Slide the Left Base Cover (88) onto the Left
Upright (84). Slide the Right Base Cover (89)
onto the Right Upright (85). Do not press the
Base Covers into place yet.
7. Identify the left Handrail (79). If there is a wire in
the left Handrail, remove and discard it.
Hold the left Handrail (79) near the Left Upright
(84). Insert the wire tie on the Upright Wire (91)
into the bottom of the left Handrail and out of
the end as shown. Then, pull the Upright Wire
through the Left Handrail.
Attach the left Handrail (79) to the Left Upright
(84) with two 5/16" x 2 3/4" Screws (12) and two
5/16" Star Washers (8). Make sure not to pinch
the Upright Wire (91). Do not tighten the
Screws yet.
Remove the two indicated screws (C) from the
left Handrail (79) and discard them.
6
84
88
7
12
91
79
Wire
Tie
10
85
89
8
C
84