Error Messages - Fluke 1503 User Manual

1507/1503
Users Manual
Table 4 Display Indicators (cont.)
Indicator
P d
Polarization index or dielectric
absorption ratio test is selected
Ohms lead zero is active.
ZERO
VAC, VDC, Ω,
Measurement units
kΩ, MΩ, GΩ
88.8.8
Primary display
V DC Volts
1888
Secondary display
Indicates selected pass/fail compare
COMPARE
value.
t
Insulation test indicator. Appears when
insulation test voltage is present.
8
Description
Table 5. Error Messages
Message
Appears on the primary display and
indicates that the battery is too low for
reliable operation. The Tester will not
batt
operate at all until the battery is replaced.
The B also appears when batt is on the
primary display.
> Indicates an out of range value.
CAL Err
Invalid calibration data. Calibrate the Tester.
Description