Emergency Release - Toshiba R6472 - DVD±RW Drive - IDE Specifications

Dvd writable drive
Hide thumbs Also See for R6472 - DVD±RW Drive - IDE:
Table of Contents

Advertisement

(5) When the release button is pressed, the indicator blinks at intervals of 0.4 seconds until the drawer
is released, then it is turned off.
0.4 s
(6) The indicator blinks at intervals of 3.25 seconds during the DVD+RW background formatting, then is
turned off when formatting is completed.

11. Emergency Release

If the drawer is not released, even after the release button is pressed, take the following steps.
(1) Turn off the drive.
(2) Insert a solid, thin rod (a paper clip, etc.) into the Emergency Release hole as shown in
Figure 20. Push firmly and remove, and the drawer will be released.
(3) Remove the disc, then close the drawer gently.
Released
Figure 19 Release
3.25 s
Figure 20 DVD+RW Background Formatting
15 mm
Figure 21 Emergency Release
Light Off
Background formatting completed
Diameter 1.0 mm
24 / 28
Light Off
TS-L532A (SD-R6472) Rev.1.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sd-r6472

Table of Contents