Download  Print this page

Connections; Power Supply Cable; Interface Cable; Audio Cable - Toshiba SD-M1212 - DVD-ROM Drive - IDE Specifications

Dvd-rom drive
Hide thumbs



11.1. Power Supply Cable

(1) Housing
(2) Contact
(3) Cable Length

11.2. Interface Cable

(1) Connector
(2) Cable
Specific Impedance

11.3. Audio Cable

(1) Capacitance
(2) Length

12.Emergency Eject

Execute following procedure only in the case of emergency (Tray will not eject and disc
can not be removed although pressing Eject Button).
(1) Turn the drive supplying power off.
(2) Insert solid bar (like paper clip) into Emergency Eject hole and push as shown in Fig.20.
Then Tray will be ejected.
(3) After removed the disc, gently push Tray to close.
AMP JAPAN P/N 1-480424-0 or equivalent
AMP JAPAN P/N 170148-2 or equivalent
AWG 28
Max. 2 m
ATAPI specification
40 core type
100 OHM +/-10 % (without shield)
Max. of 0.46 m for total ATAPI bus length
Unbalanced and shielded
Less than 1000 pF
Max. 3 m
diameter 1.0 to 1.5 mm
Figurer 20 Insert the bar
SD-M1212 Rev.1.0



  Related Manuals for Toshiba SD-M1212 - DVD-ROM Drive - IDE

  Related Content for Toshiba SD-M1212 - DVD-ROM Drive - IDE