Remote Control Configuration; Remote Programming; Remote Pairing - Viper 9153VL Owner's Manual

Remote Control Configuration

Remote Programming

The Responder LE 2-way and 1-way remote control have operations
that can be configured to a user's personal preferences. The following
instructions will direct you through the available programming options.

Remote Pairing

The following instructions will step you through the remote pairing
operation.
Press and hold the
1.
long beep and the transmit LED turns on.
2. Press and hold the
es and 3 beeps indicate remote is ready to pair.
Press and release 1 time the Integrated Programming Button (IPB)
3.
on the XL202.
Within 5 seconds, press and hold the IPB. The status LED will
4.
flash one time to confirm the system is ready for remote pairing.
5. Press the
• Responder LE: the remote will emit several tones to confirm
pairing is complete. If the remote does not emit the tones
repeat step 5.
• 1-way remote control: there is no confirmation for this remote
control.
6. Release the IPB. Remote programming will exit by itself after
30 seconds and the transmit LED will turn off.
Note Consult the installation center for the location of the XL202
or refer to dealer for programming.
© 2012 Directed. All rights reserved.
AUX
button for 8 seconds, the remote emits one
AUX
button for 1 second, 3 transmit LED flash-
button,
AUX
AUX
AUX
7