Remote And System Operations; Out Of Range; No Remote Output - Viper 9153VL Owner's Manual

Remote and System Operations

These Remote and System Operations are only applicable to Re-
sponder LE 2-way remote control.

Out of Range

Each time a command is performed the Responder LE will expect a
command confirmation from the system. If a command confirmation
AUX
is not received the and transmit LEDs flash and a long fault tone
plays as an alert.

No Remote Output

Occasionally when a command is performed the remote may not
generate a command confirmation output or Out of Range output.
This indicates that the system received the command but it was an
incomplete command (e.g. Aux button pressed too short to activate
the trunk release) or it was an illegal message (e.g. the command
was corrupted due to local RF interference). These are temporary nor-
mal functions of the system and remote, perform the command again
within 10 seconds to return to normal operation.
11
© 2012 Directed. All rights reserved.