Spanning Tree Protocol Cli Commands - Avaya P333T Installation & Configuration Manual

Chapter 11 Avaya P330 Layer 2 Features
• The 802.1w standard defines differently the default path cost for a port
compared to STP (802.1d). In order to avoid network topology change when
migrating to RSTP, the STP path cost is preserved when changing the spanning
tree version to RSTP. You can use the default RSTP port cost by using the CLI
command set port spantree cost auto.

Spanning Tree Protocol CLI Commands

The following table contains a list of CLI commands for the Spanning Tree feature.
The rules of syntax and output examples are all set out in detail in the Reference
Guide.
Table 11.3
In order to...
Enable/Disable the spanning tree
application for the switch
Set the bridge priority for spanning
tree
Set the RSTP bridge spanning tree
max-age parameter
Set the RSTP bridge hello-time
parameter
Set the RSTP bridge forward-delay
time prameter
Select between STP operation or
RSTP switch operation
Display the bridge and per-port
spanning tree information
Set the TX hold count for the STA
Add a port to the spanning tree
application
Remove a port from the spanning
tree application
Set the port spantree priority level
Set the cost of a port
74
Spanning Tree Protocol CLI Commandss
Use the following command...
set spantree
set spantree priority
set spantree max-age
set spantree hello-time
set spantree forward-delay
set spantree version
show spantree
set spantree priority
set port spantree enable
set port spantree disable
set port spantree priority
set port spantree cost
Avaya P333T User's Guide