Table of Contents
Advertisement
Spanning Tree Protocol CLI Commands
The following table contains a list of CLI commands for the Spanning Tree feature.
The rules of syntax and output examples are all set out in detail in the Reference
Guide.
In order to...
Enable/Disable the spanning tree
application for the switch
Set the bridge priority for spanning
tree
Set the RSTP bridge spanning tree
max-age parameter
Set the RSTP bridge hello-time
parameter
Set the RSTP bridge forward-delay
time parameter
Select between STP operation or
RSTP switch operation
Display the bridge and per-port
spanning tree information
Set the TX hold count for the STA
Add a port to the spanning tree
application
Remove a port from the spanning
tree application
Set the port spantree priority level
Set the cost of a port
Set the port as an RSTP port (and not
as a common STA port)
Display a port's edge admin and
operational RSTP state
Set the port as an RSTP edge port or
non-edge port
Avaya P332G-ML User's Guide
Chapter 11
Avaya P330 Layer 2 Features
Use the following command...
set spantree
set spantree priority
set spantree max-age
set spantree hello-time
set spantree forward-delay
set spantree version
show spantree
set spantree priority
set port spantree enable
set port spantree disable
set port spantree priority
set port spantree cost
set port spantree force-protocol-
migration
show port edge state
set port edge admin state
87
Advertisement
Table of Contents
