Gateway Convertible Tablet PC User Manual page 114

Chapter 7: Upgrading Your Convertible Tablet PC
12
Remove the two screws that secure the hard drive to the hard drive
kit bracket.
Screw
13
Remove the bracket from the old drive.
14
Insert the new drive into the bracket, label side up, so the screw holes
line up.
15
Replace the two screws that secure the bracket to the drive.
16
Place the new hard drive kit into the bay and slide it into the
connector.
17
Replace the screws that secure the hard drive kit to your convertible
tablet PC.
18
Insert the battery, then turn your convertible tablet PC over.
19
Reconnect the optional port replicator.
20
Connect the power adapter, modem cable, and network cable, then
turn on your convertible tablet PC.
21
For instructions on installing Windows, your drivers, and your
applications, see the instructions in the restore booklet that came
with your convertible tablet PC.
106
Screw
www.gateway.com