Viewing The Display On A Television - Gateway Convertible Tablet PC User Manual

Important
Important
Viewing the display on a
television
The S-Video out jack on your optional port replicator lets you view your
convertible tablet PC display on a television screen using a standard
S-Video cable.
Important
Important
To view your convertible tablet PC display on a television:
1
With your convertible tablet PC off, connect one end of a standard
S-Video cable to the S-Video out jack on your port replicator. For the
location of the S-Video out jack, see
2
Connect the other end of the cable to the Video in jack on your
television or VCR.
3
Turn on the television or VCR.
4
Start your convertible tablet PC.
F F3
Press + to switch between viewing the display on the
N
LCD panel and viewing the display on the projector or
monitor.
If an external monitor or projector is connected and you
close the LCD panel, your convertible tablet PC may turn
off the LCD panel, but will not enter Standby mode.
To turn on external video by default, connect the television
(or other external video device) before starting your
convertible tablet PC.
Audio is not transmitted through the S-Video out jack. Use
the built-in speakers or a set of headphones or external
powered speakers, or connect your convertible tablet PC
to a stereo system using the headphone jack to hear sound
while playing a DVD. DVD playback to a VCR will be
scrambled by copyright protection software.
www.gateway.com

Viewing the display on a television

"Back" on page 110.
75