Firmware Update; Screen Shot - Tascam DM-3200 Software Manual

Firmware update

From time to time, TASCAM will make updates
available from the Web site or through your
TASCAM distributor. To install these updates, use
the window (accessed from the
Firmware Update
menu) in the TMCompanion software:
dows
Figure 8: Firmware update
Press the on-screen button to open a file
Open
browser, where you can select the firmware update
(these always have a extension).
.tfi

Screen shot

The screen shot option allows you to capture the cur-
rent mixer screen as a PNG file to a directory of your
choosing.
2 – Using TMCompanion : Firmware update
The version of the mixer firmware and the version of
the new firmware are shown in the
Status
Win-
More information, including whether the file actually
performs a recommended upgrade or not, is available
by using the
Firmware update).
To update the TASCAM DM
screen Update button. An on-screen status bar dis-
plays the progress of the operation, and the screen of
the TASCAM DM shows the update progress. The
process takes under five minutes, including the
reboot of the TASCAM DM unit.
NOTE
The TASCAM DM should not be turned off during the
update process or subsequent reboot, although it has a
"safety-net" built in which allows the unit to be started
without a full operating system.
Use the
updating the unit.
When the option is selected, a standard browser
panel appears, allowing you to select the directory
and name the resulting file.
As the screen data is uploaded to the host computer, a
progress bar appears on screen.
TASCAM DM TMCompanion software guide
fields, respectively.
foldout (not shown in Figure 8,
More Info
button to close the window without
Close
and
Mixer Status File
Press the on-
7