Preferences; Midi Time Code; Window Settings; Confirmations - Tascam DM-3200 Software Manual

3 – Preferences
The Preferences panel allows the setting of various
parameters:
Figure 9: Preferences screen

MIDI Time Code

Firstly, MIDI Time Code can be accepted for use
with the Transport Window, and the default for this
over the USB connection is Port 3 (see the MIDI sec-

Window settings

The last window size and position can be remem-
bered, using
Save Window Size and Position

Confirmations

By default, the TMCompanion software asks for con-
firmation before transferring project data between
the host computer and the TASCAM DM (during
transfer a progress bar appears). Turn this confirma-

Settings

The mixer's internal clock and calendar may be set
from the host computer's internal clock using the
button.
Mixer Clock
TEAC CORPORATION
Phone: +81-422-52-5082
3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan
TEAC AMERICA, INC.
Phone: +1-323-726-0303
7733 Telegraph Road, Montebello, California 90640
tion of the Owner's Manual for details of the virtual
ports used by the TASCAM DM).
Enable
Display splash image
. "splash screen" announces the launching of the
TMCompanion application or not.
tion off with the
option.
You can also turn off the notice confirming quitting
the application with the
Set
and select the MIDI port.
MTC In
allows you to choose whether a
Skip Confirmation for Backup and Restore
No Confirmation on Quit
option.
www.tascam.com
www.tascam.com
Printed in China