Adjustments Before Operations - Aiwa JAX-N3 Operating Instructions Manual

ADJUSTMENTS BEFORE OPERATIONS

POWER
STANDBY / ON
MODE
ENTER
MULTI JOG
En
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote).
Pressing TAPE A/B, TUNER/BAND, VIDEO/AUX or CD also
turns the unit on (Direct Play Function.) When a disc or tape
is inserted, the playback will start automatically.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
8
POWER
SPECTRUM
VOLUME
CLOCK/
TIMER/SET
TAPE A/B,
DISPLAY
TUNER/BAND,
VIDEO/AUX,
SHIFT
CD
Volume
Turn VOLUME (Press VOLUME +, - on the remote).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby:
If the unit is turned off with the volume set to 17 or more, it is
automatically set to 16 the next time the unit is turned on.
DEMO
You can enjoy DEMO in the display when the unit is turned off.
To activate or deactivate the DEMO
Press c (c/don the remote) when the unit is turned
off.
Spectrum analyzer display
ENTER
You can change the spectrum analyzer display.
1 Press MODE repeatedly until "SPECTRUM?"
appears in the display when the unit is turned on
VOLUME
and then press ENTER.
+,–
2 Turn MULTI JOG to select one of the three
spectrum analyzer displays (PATTERN 1, 2 and 3).
If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.
On the remote, press SHIFT+SPECTRUM repeatedly.