Adjustments Before Operations; Power; Volume - Aiwa JAX-S7 Operating Instructions Manual

ADJUSTMENTS BEFORE OPERATIONS

POWER

STANDBY / ON
TAPE A/B,
TUNER/BAND,
VIDEO (MD),
CD
En
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote).
Pressing TAPE A/B, TUNER/BAND, VIDEO (MD) or CD also
turns the unit on (Direct Play Function.)
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
10
POWER
MODE
SPECTRUM
ENTER
MULTI JOG

VOLUME

CLOCK/
TIMER/SET
DISPLAY
DISPLAY
SHIFT
Volume
Turn VOLUME (Press VOLUME +, - on the remote).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby:
If the unit is turned off with the volume set to 17 or more, it is
automatically set to 16 the next time the unit is turned on.
Spectrum analyzer display
You can change the spectrum analyzer display.
1 Press MODE repeatedly until "SPECTRUM"
appears in the display when the unit is turned on
and then press ENTER within 6 seconds.
2 Turn MULTI JOG to select one of the three
spectrum analyzer displays (PATTERN 1, 2 and
ENTER
3), then press ENTER within 6 seconds.
On the remote, press SHIFT+SPECTRUM repeatedly.
VOLUME
+,–