Advertisement
A
C
Connector connection diagram
9.
B
10. Pass the solenoid cord inside solenoid shaft .
11. Connect the solenoid connector to connector C for
Machine head
connector
AC power
supply
Pedal
– 3 –
Lower the presser foot until it comes in close
contact with the throat plate. Turn solenoid shaft
counterclockwise with a screwdriver A with the
solenoid pressed in the direction of the arrow, then
tighten the connecting stud clamping screw with
hexagonal wrench key B.
(Caution) The adequate tightening torque is 3.4 to
5.9 N·m. Be aware, if the connecting stud
clamping screw is excessively tightened,
the solenoid arm can break.
the AK solenoid on the back surface of the control
box.
Advertisement
