Control Panel - Fagor Refrigerator Instruction Manual

Do not allow power cord be crushed by other (heavy)
objects .
Please call service agent immediately if you hear a
strange noise, smell smoke or a strange chemical odor.
Wait about 5 minutes before you plugin again in order
to prevent any damage to the compressor and
electrical devices of refrigerator.
Wait 2~3 hours until the inside gets cold enough after
the first power plugin, then store foods inside.
(There can be some peculiar smell of plastic parts at
initial operation of refrigerator after plugin.
The smell fades away as the refrigerator works and
doors are opened and closed.)
Precautions in use
To prevent personal injury, fire, electric shock etc. read
this user guide carefully before use and keep it as
a reference.
Accessories

Control Panel

Dispenser Model
1. FRZ.SET button
Selection button for freezer compartment
temperature.
The inside lights of the refrigerator will automatically turn off when the doors are open for more than 10 minutes.
Note In case either freezer or refrigerator door is open for more than a minute, door alarm rings for 5 minutes with
1 minute interval.
Display off function
- 5 minutes after no buttons or doors are operated by customer, all the display LED except for;
1) Dispenser Model : water, ice and ice lock icon go out.
2) Non Dispenser Model : lock icon go out.
- Under the LED off status It returns to normal display mode when customers operate buttons or doors.
System off function (power off function)
- You can stop operating the appliance without unplugging especially on holidays.
- Pressing FRZ.SET and REF.SET button at the same time for 5 seconds will make the appliance turn off.
- Under the 'off' mode freezer and refrigerator temperature displays "-- --".
At this time all LED lights will turn off and the machine will cease operating.
- In order to turn the appliance back on press and hold both the FRZ.SET and REF.SET buttons at the same time for 5 seconds..
2. LIGHT/FILTER button
1) Button for dispenser light on.
2) Button for filter exchange or reset.
After exchanging or to reset press the button
for 3 seconds.
3. Alarm display
Informs you of temperature status when temperature
abnormally rises due to accident (for exemple
blackout)
1) Alarm icon blinks displaying the highest
inner temperature.
2) Alarm stops when
and display shows temperature control value.
4. Displays the button 'Lock'
5. Filter replacement
After 6 months of first power input, the icon will
flicker.
6. Button for water dispensing. Water symbol lights up
when selected.
7. Selection button for ice dispensing and Lock for ice
maker
8. REF.SET button
for refrigerator compartment
temperature.
9. Lock button for control panel
Press button to prevent settings from being
unintentionally changed.
To release the button, press for longer than
3 seconds. The display goes out.
Non Dispenser Model
button is pressed,
3