Table of Contents
Advertisement
2.7.7
Chassis Intrusion Detection Support [Enabled]
Connect one end of the chassis intrusion sensor or switch cable to the chassis instrusion
connector. The chassis intrusion sensor or switch cable sends high-level signal to the
connector when a chassis component is removed or replaced. The signal is then generated
as a chassis intrusion event. Configuration options: [Disabled] [Enabled]
2.8
Boot menu
The Boot menu items allow you to change the system boot options.
2.8.1
Fast Boot [Enabled]
[Enabled]
Select to accelerate the boot speed.
[Disabled]
Select to go back to normal boot.
The following four items appear when you set Fast Boot to [Enabled].
SATA Support [All Devices]
[All Devices]
[Hard Drive Only]
[Boot Drive Only]
ASUS VANGUARD B85
All devices connected to SATA ports will be available during
POST. This process will extend the POST time.
Only hard drives connected to SATA ports will be detected during
POST. Any hardware change will disable fast boot.
Only boot drive connected to SATA ports will be detected during
POST. Any hardware change will disable fast boot.
2-37
Hide quick links:
Advertisement
Table of Contents
