Asus VANGUARD B85 User Manual page 56

Vanguard b85 user's manual

Hide thumbs Also See for VANGUARD B85:

Table of Contents

Scrambler Setting [Optimized ...]

Configuration options: [Optimized (ASUS)] [Default (MRC)]

MCH Full Check [Auto]

Allows you to enable, disable or automatically set the MCH Full Check function.

Configuration options: [Auto] [Enabled] [Disabled]

Skew Control

Adjust these items may enhance the DRAM overclocking capability and stability.

2.5.11

DIGI+ VRM

CPU Load-Line Calibration [Auto]

Load-line is defined by Intel VRM specification and affects CPU voltage. The CPU working

voltage will decrease proportionally to CPU loading. Higher value gets a higher voltage and

better overclocking performance, but increases the CPU and VRM thermal conditions. This

item allows you to adjust the voltage range from the following percentages to boost the

system performance: 0% (Regular), 25% (Medium), 50% (High), 75% (Ultra High), and 100%

(Extreme). Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]

The actual performance boost may vary depending on your CPU specification.

CPU Voltage Frequency [Auto]

Frequency switching affects the VRM transient response, and the thermal component. Higher

frequency gets quicker transient response. Configuration options: [Auto] [Manual]

DO NOT remove the thermal module when switching to Manual Mode. The thermal

conditions should be monitored.

VRM Spread Spectrum [Disabled]

This item becomes configurable only when you set the CPU Voltage Frequency item to

[Auto] and allows you to enable the spread spectrum to enhance system stability.

CPU Power Phase Control [Standard]

Allows you to set the power phase based on the CPU. Configuration options: [Auto]

[Standard] [Optimized] [Extreme]

2-18

Transmitter Rising Slope [Auto]