Onboard Led; Usb Connectors - Asus VANGUARD B85 User Manual

12. USB 2.0 connectors (10-1 pin USB910, USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specifications and supports up to
480Mbps connection speed.
VANGUARD B85
VANGUARD B85 USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
1.8

Onboard LED

1. Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
VANGUARD B85 Onboard LED
1-26
USB910 USB1112
PIN 1 PIN 1
SB_PWR
ON OFF
Standby Power Powered Off
USB1314
PIN 1
Chapter 1: Product introduction