Table of Contents
Advertisement
Configuring a DWX System
DWX Transmitter Series
DWT-B01/E Digital Wireless Transmitter
Compact and lightweight transmitter suitable for a wide range of
input levels, from microphone level to line audio level.
Use with a small, high-performance lavalier microphone
equivalent to the ECM-77BC/9X widely used in broadcasting
applications or K-1161 GTR adapter.
Supplied accessories for various applications include soft case
with belt clip, XLR input converter cable, etc. (48 V phantom
power supply not supported)
Two-stage switchable RF output power: 1 mW / 10 mW /50 mW
Five continuous hours of operation with two AA-size alkaline
batteries at the 10 mW power setting
Audio input connector (SMC9-4S)
Connects the output plug from the optional lavalier microphone.
This connector also accepts the input from another wired
microphone connected through the supplied XLR cable, or the
audio output from a mixer, etc.
Battery compartment
Accommodates two LR6 (size AA)
alkaline batteries.
USB connector (Micro USB)
Use this connector to connect an optional USB keyboard to carry
out menu functions using key operations. By connecting the
DWR-S01D to this connector with the supplied USB cable, you
can exchange the encryption key for encrypted transmission
function.
34
Audio Equipment Selection
(output)
DWT-P01 Digital Wireless Transmitter
The DWT-P01 is a plug-on transmitter that supports a wide range
of audio input levels, from microphone level to line level.
Allows direct connection of dynamic microphones and
condenser microphones requiring 48 V phantom powering.
Three-stage switchable RF output power: 1 mW / 10 mW /
50 mW
Five continuous hours of operation with two AA-size alkaline
batteries at the 10 mW power setting
DWX Receiver Series
DWR-R01D Digital Wireless Receiver
The DWR-R01D is a 1U-size two-channel rack-mountable receiver
with wide bandwidth coverage.
Large OLED display and JOG dial on the unit make it easy to
perform various operations quickly and precisely.
3 digital outputs in addition to 2-channel analog output.32 kHz
– 96 kHz word sync input/output connector supports system
connection for digital synchronization.
Support for diversity reception enables dual antenna input/
cascaded output.
9 or 12 V DC power supply output for powering Sony UHF AN
series active antennas.
Built-in LAN (10/100) port allows configuration of a network
system using the Remote Control Unit RMU-01 and Wireless
Studio.
Supplied Wireless Studio application supports monitoring and
control of up to 82 transmitters.
Advertisement
Table of Contents
