Table of Contents
Advertisement
Configuring a DWX System
Equipment Features
UHF Accessories
UHF Antenna AN-01
This is a unidirectional log periodic dipole antenna.
Built-in low noise and low distortion booster amplifier with three
gain settings: 18 dB/10 dB/0 dB.
Booster amplifier can be powered from connected receiver or
divider, using either 9 or 12 V DC.
Grip with screw allows mounting on a microphone stand.
UHF Antenna AN-820A
This is a horizontal omnidirectional dipole antenna.
Built-in booster amplifier provides 18 dB gain (if powered with
12 V DC) or 10 dB gain (if powered with 9 V DC).
Booster amplifier can be powered from connected receiver or
divider, using either 9 or 12 V DC.
Various supplied accessories enable mounting to a utility box
or to a wall, as well as mounting on a microphone stand.
Splashproof construction allows outdoor installation in a roofed
location.
38
UHF System Configuration
Example of horizontal
directivity characteristics
Wall installation using built-in outlet box
Plate covering the outlet box
Hangers
NO.6-32UNC
screws (supplied)
BNC
connecter
M3 screw
Fit these slots over the
hangers of attachment A.
BNC connector
Place this groove over the
antenna seat of attachment A.
Place this groove over the
antenna seat of attachment A.
Installation on a microphone stand
1
Microphone stand screw (supplied)
Microphone stand screw adaptor
(PF
1
⁄
to NS
2
M3 screw (supplied)
2
Coaxlal cable
Connect to the ANTENNA A/B IN
(DC9V OUT) connector on either of
the devices.
Microphone
stand
Connect to the
ANTENNA A/B
IN (DC9V OUT)
connector
on either of
the following
devices:
MB-8N/MB-
X6 Tuner
Base Unit
Coaxial cable
SRP-X500P/
Attachment A
X700P
(supplied)
Powered
Antenna seat
Mixer
M3 screw
(supplied)
No.6-32UNC
screw
5
⁄
) (supplied)
8
Advertisement
Table of Contents
