Planar WeatherBright LC3251 Product Manual page 28

Function Function Default
Type Value
Front Fan Set/Get 50
Speed
Temperature Get
Sensors
Get Thermal Get
Set Points
Input Source Set/Get
Selection
Panel Get
Auto Dimming Set/Get ON
Minimum Set/Get/ 5
Dimming Level Increment/
Decrement
Motion Sense Set/Get OFF
Control
Motion Sense Set/Get High
Polarity
Motion Sense Set/Get 5
Off Brightness
Ambient Light Get
Description
Set the speed of the front cooling fans when they are in
manual mode
Read the values of the internal temperature sensors.
Returns value at all 3 sensors
Returns the upper and lower thermal set points
Set or read primary video input. This input would be
displayed as a priority. If the primary input is missing auto-
search will search for another input.
Returns the native panel resolution
Controls backlight based off the ambient light sensor
Sets the lowest brightness level the display will go when
placed in auto dimming mode
Have panel respond to an external motion sensor.
Determines if the motion sense input is active high or active
low.
Sets the brightness level the display will dim to when no car
is detected
Returns the value read from the ambient light sensor
LC3251 / LC4751 Product Manual
ASCII Command Value/
Range
OP front.fan.speed 30-100
OP temperature.c
OP temp.setpoint
OP select.source VGA
DVI
ST panel EX:1366x768
OP auto.dimming OFF
ON
OP minimum.dimming.level 1-10
OP motion.sense OFF
ON
OP motion.sense.polarity HIGH
LOW
OP 1-10
motion.sense.off.brightness
OP ambient.light 0-4015
Possible Responses
Front cooling fan speed set to XXX[CR]
XXX = Fan speed 30-100
Electronics: XX deg C[CR]
Intake air: XX deg C[CR]
Top chassis: XX deg C[CR]
XX = Temperature
Over temp limit 1: XXX deg C[CR]
Over temp limit 2: XXX deg C[CR]
XXX = Temperature limit
Input set to VGA[CR]
Input set to DVI[CR]
Panel resolution: 1366 x 768 [CR]
Auto Dimming OFF[CR]
Auto Dimming ON[CR]
Auto dimming is OFF[CR]
Auto dimming is ON[CR]
Minimum dimming level set to XX[CR]
Minimum dimming level: XX[CR]
Minimum dimming level set to XX[CR]
Minimum dimming level set to XX[CR]
XX = Dimming level
Motion Sensing OFF[CR]
Motion Sensing ON[CR]
Motion Sensing is OFF[CR]
Motion Sensing is ON[CR]
Motion Sense Polarity set to Active
High[CR]
Motion Sense Polarity set to Active
Low[CR]
Motion Sense Polarity is Active High[CR]
Motion Sense Polarity is Active Low[CR]
Motion Sense Off Brightness set to XX[CR]
Motion Sense Off Brightness: XX[CR]
Motion Sense Off Brightness set to XX[CR]
Motion Sense Off Brightness set to XX[CR]
Ambient Light: XXXX[CR]
XXXX = Ambient Light
28