Multitech FaxFinder FF240 User Manual page 7

c. Select a Fax Priority. When multiple faxes are scheduled for the same time, FaxFinder
sends those with a high priority before those with a low priority. Options, from highest to
lowest priority, are:
 1st Priority
 High
Medium/High

 Medium
 Medium/Low
 Low
d. Select when you want a Fax Receipt, which will be emailed to the email address in your
user account. Options are:
Always, which sends a receipt with every fax attempt

 Failure, which sends a receipt only when a fax is not successful
 Never
e. If you want your fax receipt to include an attachment of the original fax, use Fax
Attachment with Receipt to select the attachment file format. Options are:
 None
 PDF
 TIFF
f. Enter the Retry Interval between retry attempts when the fax does not complete. The
default retry time is 5 minutes and 0 seconds.
Add fax recipients.
5.
To add recipients from available contacts:
a. Click Contacts.
b. Select a contact list from the drop-down list. Options are:
 Personal
Global

 Personal Groups
 Global Groups
Outlook Contacts (If this has been enabled)

c. Highlight the name(s) that you want and click Add. To select multiple contacts, press and
hold the Ctrl key (to select contacts individually) or Shift key (to select a range of contacts)
while clicking.
d. Click OK.
To create a new contact as a recipient:
a. Select the contact or group list that you want from the drop-down list.
b. Click Create.
FaxFinder Client User Guide
Chapter 1: Sending Faxes
7