Multitech FaxFinder FF240 User Manual page 31

If the software is set to launch when the computer boots up, the FaxFinder icon,
●
the system tray in lower right corner.
If the FaxFinder icon is not in the system tray, click Start | All Programs | FaxFinder | FaxFinder
●
Client.
Click the FaxFinder Client icon,
2.
Add or Auto Discover Devices the FaxFinder.
3.
Add a FaxFinder Manually
●
If you have the IP address, click Edit and
select Add FaxFinder to add the unit
manually.
FaxFinder Client User Guide
System Tray Icon
, and select Show FaxFinder Fax Client.
a.
b.
c.
Note:
Appendix A: Installing Client Software
Use Auto Discover Device
If you do not have the IP address, open
Tools and select Auto-Discover
Devices.
Click Search to search the available
network for available FaxFinder units.
Right-click on a name or IP address to
open a popup menu and click Add.
Depending on your configuration, your
firewall may require you to select
Allow Access to search.
, appears in
31