Call Procedure - Icom IC-F51 Instruction Manual

Vhf/uhf transceiver

Hide thumbs Also See for IC-F51:

Table of Contents

CONVENTIONAL OPERATION

■ Call procedure

When your system employs tone signalling (excluding CTCSS and

DTCS), the call procedure may be necessary prior to voice trans-

mission. The tone signalling employed may be a selective calling

system which allows you to call specific station(s) only and prevent

unwanted stations from contacting you.

q Select the desired TX code channel or 5-tone code according to

your System Operator's instructions.

• This may not be necessary depending on programming.

• Refer to pages 15 and 16 for selection.

w Push the call switch (assigned to one of the dealer programma-

ble switches: [P0], [P1], [P2], [P3], [Red], [

e After transmitting a 5-tone code, the remainder of your commu-

nication can be carried out in the normal fashion.

Selective calling

Non-selective calling

] and [

]).

Table of Contents