Clarion VRX928RVD Owner's Manual page 50

Digital Radio/DAB Operations
Cancelling an emergency broadcast
Touch the [DAB MODE] key in the MENU
screen and the [AF] key appears in the display.
If you touch the [AF] key, emergency broadcast
reception is cancelled.
Volume setting of TA, emergency
broadcast (ALARM), information
and PTY
The volume for TA, ALARM, information and
PTY interrupts can be set during TA, ALARM or
PTY interrupts.
The factory default setting is "15".
During a TA, ALARM or PTY interrupt, operate
the [VOL] button upward or downward to set the
volume to the desired level (00 to 33).
When the TA, ALARM, information or PTY
interrupt ends, the volume returns to the level it
had before the interrupt.
Dynamic Label Function
A dynamic label (hereinafter referred to as
"DLS") is a text data associated with each DAB
service. This set can display DLS up to 128
characters in a display.
This function is enabled only when the panel is
open.
DLS display mode
Touch the [DLS MODE] key in the MENU
screen to place in the DLS display mode. To
cancel the DLS mode and return to the previous
display, touch the [RTN] key. If there is a DLS
data in the reception service, DLS text is
displayed in the text displaying area.
DLS memory
Up to six DLSs, currently being received, can be
stored. Touch the [DLS MODE] key in the MENU
screen. Touch the [P.SET] key and touch and
hold the [DLS MEMO1] to [DLS MEMO6] key for
2 seconds or longer, and the DLS page
currently being displayed is stored.
DLS Calling
To call the DLS stored in the DLS memory,
press the [DIRECT] button. The DLS in the DLS
memory is displayed by 16 characters (2 lines)
at the intervals of 5 seconds (automatic calling).
To display at shorter intervals, press the
58
VRX928RVD
[DIRECT] button while waiting for successive
DLS character string to be displayed, the
following DLS character string is displayed
(manual calling).