Setting The Tv Area - Clarion VRX928RVD Owner's Manual

TV Operations

Setting the TV area

This function is enabled only when the panel is
open.
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the [ADJ] button to switch to the
ADJUST MODE menu.
2. Touch the [TV] key to select "TV AREA".
Touch the [TV AREA] key to display a list of
country name.
3. Touch the "COUNTRY NAME" key to select a
desired country.
4. When the setting is finished, touch the [RTN]
key in the TV AREA selection display to
return to the previous mode.
To return from the TV AREA select display to
the STANDARD display, press the [ADJ]
button once again.
54
VRX928RVD
Digital Radio/DAB Operations
About DAB programmes
The Digital Audio Broadcasting (hereinafter
referred to as "DAB") system transmits several
programmes on one frequency simultaneously,
by compressing audio signals.
The group of programmes, which is
transmitted on a single frequency is called
"ensemble".
Some DAB stations have several ensembles
and broadcast diversified programmes.
The number of programmes and the
contents which an ensemble provides
depend on the broadcast stations and times.
Since DAB programmes are broadcast on
several different frequencies, the same
programme can be enjoyed over large areas.
A DAB station has multiple programmes on
one frequency.
When you turn the unit on and select DAB
mode, the programme that starts is the one
that was selected before when the power
was turned off. If this programme is not
available, another programme is selected
automatically.
Programmes have their own names, just like
PS on RDS.
Note:
• For sophisticated audio quality, the receiver
needs to tune on a DAB Ensemble. While the
receiver is being tuned in to the DAB Ensemble,
the Audio outputs are muted. The tuning time is
not fixed.
Listening to the DAB
1. Press the [FUNC] button and select the DAB
mode.
2. Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
Seek tuning
1. Press the [FUNC] button to select DAB
mode.
2. Press and hold the [a] or [d] button for 1
second or longer.
The unit stops the seek tuning when it cannot
find a DAB station. The display returns to the
previous mode.