Clarion VRX928RVD Owner's Manual page 21

When the reception deteriorates, the "AF" indica-
tor flickers.
AF function between RDS and DAB
Refer to the item of DAB Operations.
REG (Regional programme)
function
When the REG function is ON, the optimum re-
gional station can be received. When this func-
tion is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
The factory default setting is "OFF".
Notes:
• This function is disabled when a national station
such as BBC 2 FM is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
Turning the REG function ON
When "REG" is not lit in the display, touch the
[RDS MODE] key in the MENU screen and the
[REG] key appears in the display.
Touch the [REG] key and "REG OFF" switches
to "REG ON".
"REG" lights in the display.
Turning the REG function OFF
Touch the [RDS MODE] key in the MENU screen
and the [REG] key appears in the display.
Touch the [REG] key and "REG ON" switches to
"REG OFF".
"REG" in the display goes off.
Manually tuning a regional station
in the same network
Note:
• This function can be used when a regional broad-
cast of the same network is received.
1. This function is valid when the AF function is
ON and the REG function is OFF.
2. Press any one of the [DIRECT] buttons to
call out a regional station.
3. Each time you press the same [DIRECT] but-
ton, the unit switches from a local station to
the other on the same network.
TA (Traffic Announcement)
In TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless
of the function mode so you can listen to it. Traf-
fic programme (TP) automatic tuning is also
possible.
RDS interrupt does not function during AM radio
reception or in TV mode.
This function can only be used when "TP" is lit in
the display. When "TP" is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
Setting TA standby mode
If you press the [TA] button when only "TP" is lit
in the display, "TP" and "TA" light in the display
and the unit is set into TA standby mode until a
traffic announcement is broadcast. When a traf-
fic announcement broadcast starts, "TRA INFO"
appears in the display. If you press the [TA] but-
ton while a traffic announcement broadcast is
being received, the traffic announcement broad-
cast reception is cancelled and the unit goes
into TA standby mode.
Cancelling TA standby mode
With "TP" and "TA" are lit in the display, press
the [TA] button. The "TA" in the display goes off
and TA standby mode is cancelled.
If "TP" is not lit, pressing the [TA] button searches
for a TP station.
Searching for a TP station
When "TP" is not lit, if you press the [TA] button,
"TA" lights in the display and the unit automati-
cally searches a TP station.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing the [TA] button
again makes the "TA" indicator go off and stops
TP station searching.
• The same operation can be performed by the
touch key on the screen instead of the [TA] but-
ton.
Touch the screen switching touchkey when the
STANDARD screen is showing or press the
[LIST] button, the MENU screen appears.
Touch the [SUB MODE] key in the MENU
screen and the [TA] key appears in the display.
RDS Operations
29
VRX928RVD