Slim Select Bay 2Nd Battery Pack; Installing; Removing - Toshiba Tecra M2 User Manual

Optional Devices

Slim Select Bay 2nd battery pack

You can insert a 2nd battery pack in the computer's Slim Select Bay. The
battery comes with an adaptor. For details on using the adaptor, follow the
steps below. For details on inserting modules in the Slim Select Bay, refer
to Chapter 4,

Installing

To install the 2nd battery pack in the adaptor, follow the steps below.
1. Fit the side of the 2nd battery pack opposite the connector into the
adaptor.
2. Lay the battery into the adaptor. The latch should close automatically to
secure the 2nd battery pack.

Removing

To remove the 2nd battery from the adaptor, follow the steps below.
1. Slide the latch in the direction of the arrow shown below.
2. Push the 2nd battery pack up from the bottom and lift it out.
8-14
Operating Basics.
Figure 8-18 Inserting the secondary battery pack in the adaptor
Figure 8-19 Removing the 2nd battery pack from the adaptor
User's Manual