Toshiba Tecra M2 User Manual page 143

5. Slide the display latch on the front of the computer to the right and open
the display panel.
6. Insert a thin object under the rim of the keyboard brace and lift out the
brace.
Remove a keyboard brace after surely performing step 4. If step 4 is not
performed, there is a possibility of damaging a keyboard brace.
7. Remove two screws securing the keyboard.
Use a point size 0 Phillips screwdriver.
8. Lift up the back of the keyboard, rotate it toward you and lay in face
down on the palm rest.
When you move the keyboard forward, do not touch the keys. Doing so
could cause misalignment. Hold the keyboard by the sides and lay it
gently on the palm rest.
The keyboard is connected to the computer by a ribbon cable. Be
careful not to apply tension to this cable when you lift up the keyboard.
Do not try to disconnect this cable.
User's Manual
Figure 8-6 Removing the keybord brace and removing two screws
Figure 8-7 Rotate the keyboard
Optional Devices
8-7