Power and Power-Up Modes
5. Slide and hold the battery release latch to free the battery pack for
removal after switching the battery lock into unlock position (to the
direction of the left), then slide out the battery pack.
For environmental reasons, do not throw away a spent battery pack.
Please return spent battery packs to your TOSHIBA dealer.
Installing the battery pack
To install a battery, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
Do not touch the latch while holding the computer. Or you may get
injured by the dropped battery by unintentional release of the latch.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Insert the battery pack.
6-14
Battery Lock
Figure 6-1 Releasing the battery pack
Battery Pack
Battery
Release Latch
User's Manual