Removing Memory Module (2Nd Memory) - Toshiba Tecra M2 User Manual

6. Reinstall the cover of the memory module slot. Fasten the screw you
loosened in Step 4.
Be sure that the cover is closed firmly.
7. Reinstall the battery pack.
After installing a memory module, turn the power of the computer on to see
a total memory size. The system will calculate the total memory size.

Removing memory module (2nd memory)

To remove the memory module, make sure the computer is in boot mode
then:
1. Save data, shutdown Windows and turn the power off.
2. Remove the AC adapter cable and other cables from the computer.
3. Close the display panel and turn the computer over. Remove the
battery pack.
4. Loosen a screw on the cover of the memory module slot.
5. Push slightly outwards the latch tabs on both sides that secure the
memory module with a pen tip or other tools, and remove the memory
module.
When the memory module rises obliquely, you can remove it from the slot.
User's Manual
Figure 8-13 Seating the memory module cover
Figure 8-14 Removing the memory module
Optional Devices
Latches
8-11