Turning The Unit On Or Off; Initializing Unit Settings - Garmin GPSMAP 4010 Owner's Manual

Getting Started
NMEA 2000
connector
Garmin Marine
Network
connectors

Turning the Unit On or Off

To turn the unit on, press and release the
I Agree
to open the Home screen.
NOtE: The first time you turn on your unit, you must go through a setup sequence. See
Unit Settings."
To turn the unit off, press and hold the
Warning Screen

Initializing Unit Settings

The first time you turn your unit on, you must configure a series of initial settings. These settings
must also be configured when restoring factory settings.
NOtE: You can change these settings later using the Configure screen.
Language—select the language to display on your screen.
Welcome—select OK.
Position Format—specify the coordinate system to use for location readings.
time Format—specify whether you want the time shown in a 12-hour, 24-hour, or UtC
(Universal Time Code) format.
time Zone—select your time zone.
Units—specify units for on screen measurements as Statute, Metric, or Nautical.
2
Power key. When the Warning screen appears, select
Power
key.
GPSMAP
Power
connector
Marine video
connector
NMEA 083
connector
"Initializing
Home Screen
4000/5000 Series Owner's Manual
®