Creating And Using Routes - Garmin GPSMAP 4010 Owner's Manual

Creating and Using Routes

You can create and store up to 20 routes with up to 250 waypoints each.
To create a route from your present location:
1. From the Navigation chart, use the map pointer (
destination (GPSMAP 5000 series) to select your destination.
2. Select Navigate To >
3. Use the map pointer (
make the last turn, or touch the location (GPSMAP 5000 series) at which you want to make the
last turn toward your destination.
4. Select Add Turn.
5. To add additional turns, select the point at which you want to make the turn (working backward
from the destination) and select
6. Select Done to finish the route, or select
To create a route in another location:
1. From the Home screen, select
2. Select Use Chart or
Use Chart, use the map pointer (
3. If you selected
location (GPSMAP 5000 series) to select the initial location at which you want to start the new
route. If you selected
4. Select Add Turn to mark the starting point of the route.
5. Choose the location of the first turn and select
6. Select Done.
GPSMAP 4000/5000 Series Owner's Manual
®
Route To.
) (GPSMAP 4000 series) to select the location at which you want to
Add Turn.
Cancel Route
Information >
Use Waypoint List.
Use Waypoint List, select the first waypoint on the route.
) (GPSMAP 4000 series) or touch your
to delete the route.
User Data > Routes > New Route
) (GPSMAP 4000 series) or touch the
Add Turn. Repeat until the route is complete.
Where To?
> Use Chart.
25