Enabling High-Resolution Satellite Imagery - Garmin GPSMAP 4010 Owner's Manual

The Fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 Vision SD card,
and is best for offshore deep-sea fishing.

Enabling High-Resolution Satellite Imagery

You can overlay high-resolution satellite images on the land, the sea, or both portions of the
Navigation chart when using a preprogrammed BlueChart g2 Vision SD card.
To enable satellite imagery:
1. While viewing the Navigation chart, select Menu.
2. Select Chart Setup
3. Select one of the following:
• Off—standard chart information is shown on the map.
• Land Only—standard chart information is shown on water with photos overlaying the land.
• Photo Map—photos overlay both the water and the land at a specified opacity. The higher
you set the percentage of opacity, the more the satellite photos will cover both land and water.
NOtE: When enabled, the high-resolution satellite images are present only at lower zoom levels. If you
cannot see the high-resolution images in your BlueChart g2 Vision region, zoom in using the
(+) key (GPSMAP 4000 series) or touch
level higher.
Photo Overlay Off
Blend at 50%
GPSMAP 4000/5000 Series Owner's Manual
®
> Photos.
(GPSMAP 5000 series). You can also try setting the detail
Land Only Photo Overlay
Blend at 100%
Using Charts
RANGE