Changing The Navigation Chart Settings - Garmin GPSMAP 4010 Owner's Manual

Changing the Navigation Chart Settings

To change the Navigation chart settings from the Home screen, select
Menu > Chart Setup.
Photos—sets the high-resolution satellite images to off, land only, or blend. High-resolution satellite
imagery is only available while using a BlueChart g2 Vision SD card.
tides/Currents—turns the display of tides and currents on or off
Service Points—turns the display of marine service points on or off.
Roses—displays a compass rose around your boat, indicating compass direction. True wind or
apparent wind direction can be displayed if the unit is connected to a compatible marine wind sensor.
Wind direction
indicator
Data Bars—show or hide cruising, navigation, fishing, fuel, or sailing numbers.
• Cruising—turn the GPS Speed, GPS Heading, Depth, and GPS Position data bar on or off.
Data Bar Setup
Select
• Navigation—turn the Distance to Destination, Arrival, Off Course, and Bearing data bar on or
off. If you select Auto, the chartplotter will turn the Navigation data bar on whenever you are
navigating to a destination. Select
Destination options.
• Fishing—turn the Depth, Water Temperature, and Water Speed data bar on or off.
• Fuel—turn the Fuel Rate, Remaining Fuel, Range, and Fuel Economy data bar on or off.
• Sailing—turn the Water Speed, Wind Speed, Wind Angle, and Wind Velocity Made Good (VMG)
data bar on or off. Select
Data bars
GPSMAP 4000/5000 Series Owner's Manual
®
Wind Compass Rose
to configure the position of the data on the screen.
Data Bar Setup
Wind
to toggle between True and Apparent wind speed and wind angle.
Charts
>
(page 27).
to configure the Route Leg, Next Turn, and
Using Charts
Navigation Chart
>
Compass rose