Garmin GPSMAP 4010 Owner's Manual page 17

To save the active track:
1. From the Home screen, select
2. Select either the time the current track began (or Midnight, if shown) or
3. To name the track, change the color of the track, or save it as a route, select
To clear the active track:
From the Home screen, select
track memory is cleared; the current track continues to be recorded.
To retrace the active track:
1. From the Home screen, select
2. Select either the time the current track began or
3. Follow the colored line on the screen.
To edit or delete a saved track:
1. From the Home screen, select
2. Select the track you want to edit or delete.
Edit Track
3. Select to change the name or color of the track, or select
To set active Track Options:
From the Home screen, select
Record Mode—select Off, Fill, or Wrap.
• Off—does not record a track log.
• Fill—records a track log until the track memory is full.
• Wrap—continuously records the track log, replacing the oldest track data with new data.
Interval—defines the frequency at which the track plot is recorded. Recording more-frequent plots
is more accurate but fills the track log faster.
• Interval—sets whether the interval is determined by distance, time, or resolution. (Select
Change to set the value.)
• Distance—records the track based on a distance between points.
• time—records the track based on a time interval.
GPSMAP 4000/5000 Series Owner's Manual
®
Information > User Data
Information > User Data
Information > User Data
Entire
Information > User Data
Information > User Data
> Tracks > Save Active
Entire
Edit
> Tracks > Clear Active
> Tracks > Follow Active
Log.
> Tracks > Saved Tracks.
Delete
to delete it.
> Tracks > Active Track
Using Charts
Track.
Log.
Track.
Track. The
Track.
Options.
3