Garmin GPSMAP 4010 Owner's Manual page 24

Using Combinations
To customize the screen combinations:
1. While viewing the Combinations screen, select
Home screen, select
Combination
screen 
Combination
screen 2
Data bar
2. Select Functions to select the number of combination screens, select
data bar on or off, and select a numbered button such as
select the combination screens to view.
3. Select Done.
NOtE: You can only choose from the options available to your unit. To increase the number of screens
available, use a BlueChart g2 Vision SD card or add network devices.
To add additional data fields:
1. While viewing the Combinations screen, press the soft key corresponding to an unused data field
(GPSMAP 4000 series) or touch an unused data field (GPSMAP 5000 series).
Adding a Data Field (GPSMAP 4000 series)
2. Select the Digital Item to be displayed on the Combinations Screen. Available options vary, based
on the network configuration and the unit.
To edit an existing data field:
While viewing the Combinations screen, press a soft key corresponding to a data field (GPSMAP
4000 series) or touch a data field (GPSMAP 5000 series). Select the item to be displayed.
To change the layout to horizontal or vertical:
1. While viewing the Combinations screen, select
Layout Vert.
2. Select
20
Combinations > Unused Combo
Layout Horiz.
or
Menu > Change Combination, or, from the
(if one is available).
Data Bar
1. Nav Chart
New data field
Menu > Change Combination.
GPSMAP 4000/5000 Series Owner's Manual
®
Select the number of
combination screens
Change to vertical or
horizontal layout
Toggle the
data bar
Change combination
screen 
Change combination
screen 2
to toggle the
in the example above to