Front Panel Connection; Rear Panel Connection - Icom VHF IC-FR5000 Insrtuction Manual

2
INSTALLATION AND CONNECTIONS
n Front panel connection
HM-152 HAND
MICROPHONE
(optional)
n Rear panel connection
SP-22 EXTERNAL SPEAKER
Connect a 4 ˘ external speaker.
[RX ANT] (p. 4)
5
SM-25 DESKTOP
MICROPHONE
(optional)
CAUTION: DO NOT short pin 1 to ground as this can
damage the internal 8 V regulator. DC voltage is applied
to pin 1 for microphone operation. Only Icom micro-
phones are recommended.
ACC CONNECTOR (p. 3)
Used for external equipment control.
R CAUTION! NEVER remove
the fuse-holder from the DC
power receptacle.
R When you disconnect the
DC power cable, take care
no crack of your fingernail.
w
q Push
P 0 P 1 P 2 P 3
MICROPHONE CONNECTOR (Front panel view)
q +8 V DC output (Max. 15 mA)
w Output port for PC programming
q i
e NC
r M PTT (Input port for TX control)
t Microphone ground
y Microphone input
u Ground
i Input port for PC programming
20 A
fuses
Supplied
DC power cable
P 4
[TX ANT] (p. 4)
AC outlet DC power supply
13.6 V; at least 20 A
Red Black
+ _
AC cable
Red
Black