Receiving A Call - Icom VHF IC-F50 Insrtuction Manual

■ Receiving a call

D Individual call
q When an individual call is received;
• Beeps sound.
• " " appears and the mute is released.
• The programmed text message (e.g."
station ID (or text) is displayed alternately, depending on the set-
ting.
• " " appears or blinks depending on the setting.
w Push and hold [PTT], then speak into the microphone at a nor-
mal voice level.
• Transmit/Busy indicator lights red.
e Release [PTT] to return to receive.
• Transmit/Busy indicator lights green while receiving a signal.
r To finish the conversation, push [P3] (Moni(Audi)) to send the
"Clear down" signal.
• Either station can send a clear down signal.
• "
• " " disappears and the transceiver returns to the standby condi-
tion.
Appears
" is displayed for approximately 2 sec.
BIIS OPERATION
Appears or blinks
4
") and the calling
4
20